Visit
Official Website

Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
sales@hexoind.com
 +60125582052
  +60129541088

Selangor Branch
Jalan Putra Bistari 2/5J, 47610 Subang Jaya, Selangor, Malaysia

Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.

Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.

Agilent / Varian PHD-4 Sniffer

AllLeak DetectorPortable Sniffer

Previous 1 / 8 Next


Agilent / (previously is Varian) PHD-4 Sniffer Helium Leak Detector

The Agilent / (previously is Varian) PHD-4 sniffer helium leak detector is able to detect very small leaks in objects that have a slight helium/air pressure inside. The lightweight and rugged sniffer is sensitive to helium concentrations as small as 2 ppm- equivalent to a leak rate of 5x 10-6 atm-cc/sec, far superior to the performance by other means of detecting leaks, such as bubble-testing. The PHD-4 sensitivity relies on Agilent’s proprietary and patented SIPD (Selective Ion Pump Detection) technology. Since it is controlled by a microprocessor, the PHD-4 is easy to use with no training required. All tuning and zeroing are handled automatically. 

Features
  • The PHD-4 weighs only 2,6 Kg (5.7 lbs) including the battery
  • Wide range of uses: Replaces or can be used with existing methods such as bubble test or pressure decay
  • State-of-the-art microprocessor control allows great simplicity of operation
  • Fully automatic start-up
  • Ready for test in less than 3 minutes
  • Excellent selectivity for helium allows you to read helium leaks and ignore all other gases
  • Helium sensitivity can be adjusted as required to minimize test costs and helium consumption
  • Can operate either on battery power or connected to an outlet line voltage
  • The display can be set to use any of four languages (English, French, Germany, or Italian)
Specifications
Tech Specs
 
Lowest detectable helium concentration 2 parts per million (ppm)
Smallest detectable leak 5 × 10-6 atm-cc/sec
5 × 10-6 mbar-l/sec
5 × 10-7 Pa-m3/sec
Response time <2 seconds
Recovery time (from 50 to 0 ppm) <10 seconds
Start-up time, including self-check 3 minutes (approximate)
Power requirements 12 VDC from battery pack, car battery, or transformer
Transformer power supply 110-240V 50-60 Hz
Sealed, detachable battery pack 4 hours of operation with full charge
Ambient storage temperature -20 to +60 °C (4 to 140 °F)
Ambient operating temperature -5 to +35 °C (20 to 95 °F)
Maximum relative humidity 90%
Weight, basic module with battery 5.7 lbs (2.6 kg)
Background suppression (zeroing) Automatic
Tuning Automatic

Order Information :

PHD-4 Complete Package            Part Number : 9694640
Travel Case includes 
• PHD-4 basic unit
• Spare battery
• Transformer/Battery charger (110-240 V)
• Carrying strap
• Probe set
• 15-pin I/O connector
• CD Instruction manual

PHD-4 Basic Package                   Part Number : 9694600
Includes 
• PHD-4 basic unit
• Transformer/Battery charger (110-240 V)
• Carrying strap
• 15-pin I/O connector
• CD Instruction manual

PHD-4 Replacement Part Kit        Part Number : 9694660
Includes 
• Sampling pump with fittings
• Probe with sampling line
• Tip probe filter
• Internal filter (kit of 5 units)

Accessories                                                                 Part Number
• Probe set                                                                     9693515
• Capillary leak with refillable reservoir and gauge        9693540
• Probe with 10 meter (30’) maximum sampling line     9693525
• Telescoping extension probe                                      9693520

Individual Replacement Parts                                    Part Number
• Spare battery                                                              SR03702609
• Power supply (110-240 V)                                          SR03702888
• Sampling pump with fittings                                       SR03702513
• Probe with sampling line                                            SR03702538
• Tip probe filter                                                            SR2890001201
• Internal filter (kit of 5 units)                                        SR03702959
• Carrying strap                                                            SR03702791
• 15-pin I/O connector                                                  SR03702894
• Travel Case (metal)                                                   SR03702890
• Protective Bag (canvas)                                            VSPHD4BAG
 
-

Reasons for using our Helium Leak Detectors for Fine Leak Testing
Leak testing is crucial because, well, everything leaks! Here are the fundamental reasons for performing leak tests:
  1. Preventing Material Loss by Leakage Detecting and addressing leaks ensures that valuable materials are not lost due to escaping gases.
  2. Avoiding Contamination Leaks can introduce contaminants into a system, affecting product quality and reliability.
  3. Ensuring Product Performance and Reliability Leak-free products perform better and are more reliable, leading to satisfied customers.
  4. Reducing Liability Leaks can lead to safety hazards, environmental issues, and legal liabilities.
  5. Minimizing Production Output Loss System downtime caused by leaks can significantly impact production output.
All of these factors contribute to improved quality and reduced warranty costs.
 

Why Hexo Uses Helium as a Tracer Gas?
  • Helium’s Properties:
    • Helium, with a molecular weight of 4 atomic mass units (amu), is readily available worldwide.
    • Its low background noise makes it an excellent choice for leak detection applications.
    • Helium is non-toxic, non-flammable, inert, and not easily absorbed.
    • It allows for non-destructive testing (NDT).
Why Choose Hexo:
  • Variety of Helium Leak Detector Models: Hexo offers different models to suit your specific needs.
  • Pump Options: Dry pumps or oil pumps are available for both cleanroom and non-cleanroom environments.
  • Customizable Pumping Speed: Choose the pumping speed based on your process requirements.
  • Flexible Types: Hexo provides options with or without carts, as well as handheld detectors.
  • Suitable for Various Test Methods: Whether it’s spray vacuum or sniffing, Hexo detectors can handle different testing approaches.
  • Comprehensive Support: Accessories, spare parts, and calibration services are available from Malaysia factory. Our experienced team provides technical support and training after sales.
  • Rental Units: If needed, you can rent Hexo Helium Leak Detectors.
 
Hexo Helium Leak Detectors are available for sale in Malaysia, Indonesia, Philippines, Vietnam, Singapore, Thailand, and the South East Asia Region.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   


Quick Links

Recent Post

Contact

1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.

+6011-6528 1088
+604-611 1186
+6012-954 1088

+6012-558 2052

sales@hexoind.com

+60125582052
+60129541088

https://www.hexoind.com

© 2019 - 2024 Hexo Industries (M) Sdn Bhd      201101011453 (Co. No. 939586T / 201101011453)        
Powered by N.MY
Subscribe Newsletter