S3502D: 9kHz - 20GHz

                               S3502E: 9kHz - 26.5GHz

                               S3502F: 9kHz - 32GHz

                                                               S3502G: 9kHz - 44GHz

Last calibration date × aging rate + temperature stability + calibration accuracy

±5×10^-7/year

Temperature stability

±1×10^-7 (0°C - 50°C, relative to 25±5°C)

Initial calibration accuracy

±3×10^-7

± (frequency reading×frequency reference error +2% ×sweep width +10% ×resolution bandwidth)

10μs - 600s (zero span)

±2.00% (zero span)

1Hz - 10MHz (step by 1-3)

 1kHz - 3MHz: ±10%

10MHz: ±20%

±1.20dB 1Hz - 10MHz (take 100kHz RBW as a reference)

1Hz - 10MHz (1-3 times step)

Normal, Peak, Neg Peak, Sample, Average, RMS

Display Average Noise Level

(50Ω load at the input end, 0dB input attenuation, average detector mode, logarithmic Video Type, RBW normalization to 1Hz, 20-30°C)

Preamplifier off

Residual Response

(RF input match, 0dB attenuation)

Preamplifier off

(Exceptional frequency: 3200MHz)

Single-sideband Phase Noise

(Carrier wave 1GHz, 20°C-30°C)

10kHz frequency offset

<= -102dBc/Hz

<-60dBc (0dB attenuation, -30dBm input signal)

1dB Gain Compression

(Double-tone test, 10MHz signal spacing)

3-order Intermodulation Distortion 

(-25dBm double-tone signal, 100kHz spacing, 0dB attenuation, pre-amplifier off)

Absolute Amplitude Accuracy

(10MHz-40GHz, input

signal -10 to -50dBm, auto, 20°C-30°C)

±1.80dB

±2.30dB

Scope of attenuation 0dB - 50dB, 10dB step

Conversion uncertainty: ±1.20dB

+30dBm

+23dBm

Logarithmic scale -120dBm to+30dBm, 1dB step

22.36μV - 7.07V, 0.1% ste

±1.20dB (reference level 0dBm  to -60dBm)

Logarithmic scale

0.1dB - 10dB per scale, minimum 0.1dB step, 10-scale display

V, A, W, dBm, dBW, dBV, dBmV, dBuV, dBA, dBmA, dBuA

±1.00 dB

AC 220/240V, 50/60Hz

<60W (working state)

0°C to +50°C

-40°C to +70°C

Electromagnetic Compatibility

Conforms to GJB3947A-2009 3.9.1 Requirement

S3502D/E: Type-N (f)

S3502F/G: 2.4 mm (m)

10 MHz reference input/output: BNC female connector

External trigger input: BNC female connector

Intermediate frequency output: BNC female connector

GPS antenna input: BNC female connector

LAN, USB, VGA output

S3502 spectrum analyzer

Standard three-core power line

USB programmable cable

Tracking generator option

Provide the independent, tracking source scanning method

Point to point, 2 meters

GPS external antenna

USB power meter option

Provide USB power meter function 

(Needs USB power probe:009/010/011/012)

87230 USB continuous wave power probe

Provide spectrogram, RSSI measurement etc. function

S3502-014

AM/FM/PM analyzer option

To realize modulation characteristics analysis of AM/FM/PM signals

Channel scanner option

To realize signal power measurement of multiple channels and frequency

List sweep option

To realize continuous sweep measurement of various frequency bands

Field strength option

Realize the field strength of the dot frequency, frequency scan and list scan

Zero span IF output

Output the third or fourth IF signal (Choose one of two)

89101A antenna

Frequency range: 10kHz - 20MHz (Needs option 023)

Frequency range: 10kHz - 4GHz, Type-N (f) 

(Needs option 019/020/021/022)

Frequency range: 1GHz - 18GHz, Type-N (f)

Frequency range: 18GHz - 40GHz, 2.92mm (f)