Visit
Official Website

Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
  +60129541088

Selangor Branch
Jalan Putra Bistari 2/5J, 47610 Subang Jaya, Selangor, Malaysia

Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.

Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.

Saluki S5700 Series Field Comm Analzyer (SA+CA+Optical)

Previous 4 / 8 Next


S5700 Series Field Comm Analyzer combines the highest performance operating specifications and multi-functional measurements such as cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/optical power measurements in a single instrument.
Key Features

Cable and Antenna Analyzer: 2MHz - 4.4GHz/ 6.0GHz

Spectrum Analyzer: 9kHz - 4.4GHz/ 6.0GHz

Test MIMO 4x4 antenna performance

Return loss, Cable loss, VSWR, DTF, Smith chart, 1-Port phase

RF, fiber and wireless signal quality testing in a single instrument

Powerful analysis capabilities of management software

Detect signal degradation and system performance over time with trace overlay

Perform traditional RF feedline tests, inspect fiber connectors with auto pass/fail results and measure RF/Optical power
 

Detailed
 
 
 

 

1

line.gif

2line.gif

3line.gif

4

line.gif

5

line.gif

6

line.gif

5

line.gif

6

line.gif

7line.gif

8line.gif

spectrum-analyzer-priceline.gif

As a multi-functional instrument, the S5700 series can be configured to meet your specific test needs at the time of purchasing or can be upgraded in the future need. Additional option measurement functionality can be added on the fly in the field in a matter of seconds.

Designed specifically for wireless communication field engineers and technicians who is performing installation, maintaining and troubleshooting of the wireless communication sites, the S5700 series was developed to get the job done right with multiple cutting edge features that deliver accurate measurement, improve productivity and reduce OPEX and CAPEX.

 

 

Configuration Comparison of S5700/ S5800L/ S5800E/ S5800H Analyzer

Model

S5700

S5800L

S5800E

S5800H

Spectrum Analyzer

Yes

Yes

Yes

Yes

Cable and Antenna Analyzer

Yes

/

/

/

Interference Analyzer (Optional)

Yes

Yes

Yes

Yes

FDD-LTE Signal Analyzer (Optional)

Yes

/

Yes

Yes

TDD-LTE Signal Analyzer (Optional)

Yes

/

Yes

Yes

GSM/ CDMA&EVDO/ WCDMA/ TD-SCDMA Signal Analyzer

Yes

/

Yes

Yes

Coverage (Optional)

Yes

Yes

Yes

Yes

OPM & VFL &Wifi & Channel Scanner

Yes

/

/

/

Touch Screen Yes / / Yes
 
 
Technical Specifications

1. Cable & Antenna Analyzer

Model S5700A S5700B
Frequency
Frequency Range 2MHz - 4.4GHz 2MHz - 6.0GHz
Resolution 1kHz 1kHz
Measurement Speed
Reflection < 0.8ms/point
DTF < 1ms/point
Data Points 130, 259, 517, 1033, 2065
Measurement Accuracy
Corrected Directivity 42dB (typical, after standard OSL calibration)
38dB (typical, after E-cal calibration)
Interference Immunity
On-channel +20dBm & >1MHz of carrier frequency
Off-channel +10dBm within ± 10kHz of carrier frequency
Measurements
Return Loss 0 to 60dB (resolution 0.01dB)
Cable Loss 0 to 30dB (resolution 0.01dB)
VSWR 1:1 to 65:1 (resolution 0.01)
DTF Range (Distance) 1500 meters (4921 feet)
Output Power 0dBm (Nominal)
Connectors
RF Out N type, Female, 50Ω
RF Out Damage Level 25dBm, ±50VDC peak
Impedance 50Ω

 

2. Spectrum Analyzer

Model S5700A S5700B
Frequency
Frequency Range 9kHz - 4.4GHz 9kHz - 6.0GHz
Turning Resolution 1Hz 1Hz
Aging ±1.0ppm/yr
Frequency Span

1kHz to 4GHz in 1-2-5 sequence (automode),

 and 0Hz (zero span)

1kHz to 6GHz in 1-2-5 sequence (automode), 

and 0Hz (zero span)

Bandwidth
Resolution Bandwidth (RBW) 10Hz to 3MHz in 1-3 sequence (auto or manually selectable)
Video Bandwidth (VBW) 10Hz to 3MHz in 1-3 sequence (auto or manually selectable)
Spectral Purity (Phase Noise)
@ 1kHz Offset from Carrier -90dBc/Hz
@ 10kHz Offset from Carrier -100dBc/Hz
@ 10kHz Offset from Carrier -105dBc/Hz
Amplitude
Dynamic Range >100dB
Maximum Safe Input Level +30dBm (peak power, input attenuation >15dB), 50VDC
Amplitude Accuracy ±1.0dB
Attenuator Range 0dB to 55dB in 5dB steps
DANL (Input terminated, RBW = 1Hz, Attn = 0dBm, Avg detector, Typical)
Preamp Off

< -144dBm (1MHz - 1GHz)

< -138dBm (1GHz - 4GHz)

Preamp On < -158dBm (1MHz - 1GHz)

< -154dBm (1GHz - 4GHz)

 

3. Optical Measurement

Model S5700A S5700B
Optical Power Meter
Accuracy ±0.25dB
Dynamic Range -50dBm to +27dBm
Wavelength 850/ 980/ 1300/ 1310/ 1490/ 1550/ 1610 nm
Resolution 0.01 dBm, mW, uW, nW
VFL
Output Power 10mW
Adapter FC/PC

 

4. General Information

Model S5700A S5700B
Display
Type/ Size Touch Screen, TFT LCD / 8.4 inch (800*600)
Data Storage
Internal 1GB, >2000 saved measurement files
External Limited by size of USB flash drive
Size & Weight
Size 258mm * 173mm * 74mm
Weight 3kg
Battery
Type Li-ion, 11.1V, 5200mAh
Operation Time

>6 hrs, continuous; 8hrs, idle (CA mode)

>4 hrs, continuous; 8hrs, idle (SA mode)

See more specifications in the datasheet.

 
Standard Package
 
No. Item Qty.
1 Main Machine 1 pcs
2 AC/DC Adapter 1 pcs
3 Rechargeable Li-ion Battery 1 pcs
4 Vehicle Plug-in Lighter Deveice 1 pcs
5 ''Y'' OSL Clibration Device 1 pcs
6 1.5m Test Port Extension Cable 1 pcs
7 Soft Carrying Case 1 pcs
8 CD (Site Workbench Software and Manual) 1 pcs

 

Options of S5700 Series Field Comm Analyzer
Option No. Item Description
S5700-01 RF Power Meter (Software)

Providing true RMS measurements with accurate measurements for both CW and complex 

digitally modulated signals.

S5700-02 In-line Bi-Directional RF High Power Sensor 300MHz to 4GHz, 2mW to 150W, N(f), 50Ω
S5700-03 Terminal RF Power Sensor 1MHz to 6GHz, -30dBm to +20dBm, N(m), 50Ω
S5700-04 Interference Locatiton Analysis

Add Spectrogram, RSSI, Signal ID, Signal Strength, Interference Location Mapping, Delta

Spectrum and DPS measurement applications to the spectrum analyzer. 

(Need directional log periodic antenna, option 13-17)

S5700-05 Signal Coverage Mapping Allowing users to map RSSI and ACPR measurements. (Need option S5700-06)
S5700-06 GPS Module (USB) /
S5700-07 Signal Analysis LTE, WCDMA, TDSCDMA, GSM, CDMA
S5700-08 GPS Module (Internal Built-in) /
S5700-09 Optical Power Meter and VFL

Using for all optical power measurements, such as optical fiber loss measurement and optical

device performance evaluation.

S5700-10 802.11 A/B/G WiFi Module Internal built-in
S5700-11 2-Port Transmission Measurement Providing the capability to perform 2-port measurements.
S5700-12 Channel Scanner /
S5700-13 Directional Active Log Periodic Antenna Frequency range: 9kHz to 20MHz
S5700-14 Directional Active Log Periodic Antenna Frequency range: 20MHz to 200MHz
S5700-15 Directional Active Log Periodic Antenna Frequency range: 200MHz to 500MHz
S5700-16 Directional Active Log Periodic Antenna Frequency range: 500MHz to 3GHz
S5700-17 Directional Active Log Periodic Antenna Frequency range: 500MHz to 8GHz
S5700-18 Antenna Handle with GPS and Electronics Compass /

 


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   


Subscribe Newsletter