VACUUM DEGASSING SYSTEM - TABLETOP

The kits are supplied with all connection nozzles to the chamber and vacuum pump. If you require faster pumping times then larger pumps can replace the standard kit pump. 

3 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP3K4

• A 3 litre steel degassing chamber (156mm internal diameter and 155mm internal height)
• A LC.4 rotary vane oil vacuum pump (Single stage, Pumping speed 4m³/hr, Final pressure 2 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 18 secs.

 

9 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP9K4

• A 9 litre steel degassing chamber (206mm internal diameter and 270mm internal height)
• A LC.4 rotary vane oil vacuum pump (Single stage, Pumping speed 4m³/hr, Final pressure 2 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 45 secs.

 

9 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP9K8

• A 9 litre steel degassing chamber (206mm internal diameter and 270mm internal height)
• An LB.8-AVE rotary vane oil vacuum pump (Single stage, Pumping speed 8m³/hr, Final pressure 2 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 23 secs.

 

27 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP27K8

• A 27 litre steel degassing chamber (311mm internal diameter and 356mm internal height)
• An LB.8-AVE rotary vane oil vacuum pump (Single stage, Pumping speed 8m³/hr, Final pressure 2 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 73 secs.

27 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP27K12

The HXADP27K12 kit will comprise the following:

• A 27 litre steel degassing chamber (311mm internal diameter and 356mm internal height)
• An LC.12 rotary vane oil vacuum pump (Single stage, Pumping speed 12m³/hr, Final pressure 2 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 49 secs.

 

42 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP42K12

• A 42 litre steel degassing chamber (373mm internal diameter and 381mm internal height)
• An LC.12 rotary vane oil vacuum pump (Single stage, Pumping speed 12m³/hr, Final pressure 2 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 79 secs.

 

42 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP42K25

• A 42 litre steel degassing chamber (373mm internal diameter and 381mm internal height)
• An LC.25 rotary vane oil vacuum pump (Single stage, Pumping speed 25m³/hr, Final pressure 0.5 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 38 secs.

 

76 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP76K25

• A 76 litre steel degassing chamber (460mm internal diameter and 460mm internal height)
• An LC.25 rotary vane oil vacuum pump (Single stage, Pumping speed 25m³/hr, Final pressure 0.5 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 68 secs.

 

76 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP76K40

• A 76 litre steel degassing chamber (460mm internal diameter and 460mm internal height)
• An LC.40 rotary vane oil vacuum pump (Single stage, Pumping speed 40m³/hr, Final pressure 0.5 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 43 secs.

 

118 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP118K25

• A 118 litre steel degassing chamber (500mm internal diameter and 600mm internal height)
• An LC.25 rotary vane oil vacuum pump (Single stage, Pumping speed 25m³/hr, Final pressure 0.5 mbar)
• Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
• 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
• Vacuum pump oil.
• Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 106 secs.


---
Please note :

•  Degassing water based mixtures such as Plaster, Acrylic, Refractory Cements etc can lead to problems with the water vapor mixing with oil in the vacuum pump. If you are continuously degassing water based mixtures then we can supply special pumps and equipment that will reduce or prevent the problems associated with water based mixtures. Please contact us for advice.
• The volume of the chamber is not the capacity of liquid that can be degassed. Liquids can expand when being degassed  and could be 4-5 times the initial volume.A suitable sized mixing bucket or container should be used inside the chamber to contain the silicon/resin to be degassed. The size of the container should be sufficient to allow for any expansion that may occur during the degassing process. ​