Brochures

•  CA700 Pressure Calibrator (7.7 MB)
•  Process Test Tools Selection Guide (2.0 MB)

Specifications

•  CA700 + FieldMate Flyer (1.2 MB)

Pressure is one of the most important and commonly measured forces in industrial plants and sites. Other commonly measured forces, such as temperature, flow and level, can all be derived from pressure. Because of this, pressure transmitters are especially crucial for maintaining the health and safety of plant operations. For a pressure transmitter to perform reliably, periodic calibration of these devices is absolutely necessary. Yokogawa's pressure calibrators are specifically suited for this task due to their:

Dedicated Functionality

• Supports customizable, bulit-in ''AS-FOUND'' and ''AS LEFT'' routines
• Can be used as a data logger or USB storage
• Integration with FieldMate 3.03 for an all-in-one calibration system
• Integration with pressure modules to calibrate up to 2.3K PSI

Accuracy

• Best in class accuracy for the portable pressure calibrator product line
• Utilizes the same high quality Yokogawa patented dPharp sensor technology
• Different pressure ranges allow maximum resolution, no matter the situation

Durability

• Built with you in mind - Reliable, rugged, and battery-powered
• IP54 dust and water proof case for harsh enviroments
• Light-weight and built-in stand

The CA700 Pressure Calibrator is the most accurate calibrator in the portable class having a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading on Current/Voltage source measurement. Supporting “As Found”, “As Left”  and error rate, makes the CA700 a great tool for field calibration and maintenance work. Available in low pressure, medium pressure or high pressure ranges  with selectable high-performance hand pumps for each range. Pressure modules are available which extend the range of the CA700 when calibrating higher pressures. 

Portability meets accuracy

• Accuracy 0.01% rdg for Pressure / 0.015% rdg for Current/Voltage (source/measurement)
• Highest resolution class 0.001kPa (200.000 kPa range) 0.0001 psi (29 psi range)

Perfectly engineered for pressure calibration

• “As Found”, “As Left”  and error rate (%)
• IP54 dustproof and water proof case for harsh environments
• 4-20mA step function for signal generation
• 20mA Simulator to carry out loop test. 
• Two-wire Transmitter Loop Check
• 250-ohm resistor for HART and BRAIN communication
• Supports compatibility with FieldMate 3.03 for a fully integrated calibration system

Model Numbers

Accessories

External pressure sensor PM100 (Accessory for CA700)

• PM100 External Pressure Sensor
• Enables pressure calibration in even higher pressure ranges using CA700
• Up to 70 MP

98026 Grabber Clip

A set of separate red and black clips (for 2 m long wires).

93050 Carrying Case

Carry your Scopecorder with this carrying case.

91040 Cleaning Unit

Can connect to –P1 or –P2, input and output port are Rc1/8” female thread

91041 Cleaning Unit

Can connect to –P1 or –P2, input and output port are 1/8” NPT female thread

91080 Connector

R 1/4'' male thread to 1/8” NPT female thread conversion connector (for -P1)

91081 Connector

R 1/4” male thread to 1/4” NPT female thread conversion connector (for -P1)

91082 Connector

1/4” NPT male thread to 1/8” NPT female thread conversion connector (for –P2)

91050 Hand Pump Kit (Low Pressure)

Hand pump (91051), connector set (91052), case (93052)

98064 Lead Cables

Alligator clip, CAT I, for controlsignal only (under 70 V)One set of 1 red and 1 black cablesLength: Approx. 1.7m

91060 Hand Pump Kit (Hydraulic)

Hand pump (91061), connector set (91062), case (93053)

91061 Hydraulic Pressure Pump

Hydraulic Pressure Pump 91061 (Accessory for CA700)

91052 Hand Pump Connector (Low Pressure)

Connector set for the 91051 (quick adapter, pressure conversion adapter, flexible hose, sealing tape)

91057 Hand Pump Connector (Pneumatic)

Connector set for the 91056 (quick adapter, sealing cap, flexible hose, sealing tape, and hex wrench)

91051 Low Pressure Pump

Low Pressure Pump 91051 (Accessory for CA700)

91062 Hand Pump Connector (Hydraulic)

Connector set for the 91061 (high-pressure hose, quick adapter, conversion adapter, sealing tape, and hex wrench)

91056 Pneumatic Pressure Pump

Pneumatic Pressure Pump 91056 (Accessory for CA700)

93052 Hand Pump Case (Low Pressure)

Case for the 91051 (91051, 91052, and instruction manual)

93053 Hand Pump Case (Pneumatic/Hydraulic)

Case for the 91056/91061 (91056, 91057, 91061, 91062, and instruction manual)