• DLM3000 Series Mixed Signal Oscilloscope
• Enhanced productivity small footprint touchscreen oscilloscope
• Design and validate advanced serial bus, power supply, and electromechanical systems

Best Mixed Signal Oscilloscopes

The DLM3000 builds on Yokogawa's oscilloscope legacy with new features focusing on quality, flexibility, and usability to increase our users' productivity and meet the advanced needs of today's mechatronics designs. Integrating the latest in touchscreen operation, solid-state storage, and high-speed signal processing, the DLM3000 enhances productivity by providing clean signals, extensive processing, and ease of operation. The DLM3000 touchscreen oscilloscope provides productivity at your fingertips.

What is a mixed signal oscilloscope?

Mixed-signal oscilloscopes are standard oscilloscopes with logic analyzers. They have digital storage and digital and analog input channels to compare and display signals.

Quality

Yokogawa is committed to measurement quality, and the DLM3000 features lower residual noise, extensive voltage ranges and a variety of real-time lowpass filters to ensure the fidelity of your signals.

Flexibility

Channel count and memory depth options combined with optional Power Math and serial bus features including major automotive buses ensure an oscilloscope can be configured for a variety of needs.

Usability

The combination of a touchscreen with a traditional panel of oscilloscope controls allows users to seamlessly transition, while communication and storage options make it easy to access large data sets.

Input

Observe fine details captured by the completely redesigned analog front end, offering lower volts per division settings down to 500 μV/div and lower residual noise. Select one of 14 real-time low pass filters to reduce noise displayed on-screen and stored in memory. Four-channel models include a selectable 8 bits of digital input for capturing mixed signals. Push a single button to change channel four into an 8-bit digital analysis channel for a total 11-channel mixed-signal oscilloscope.

Configurations

Long memory is standard with 12.5 Mpoints (repeating acquisition) or 125 M (single interleave) to capture cause and effect relationships. Options up to 50 M / 500 Mpoints are available. Choose a 2-channel or 4-channel model to meet your technical and budgetary needs. Select from 200, 350, or 500 MHz bandwidth to capture the fast transients of your systems. Add Power Supply Analysis or Serial Bus options to get more done inside the instrument without the added step of an external PC.

Technology

Gigabit Ethernet and USB 3.0 data transfers are standard, making it easier to work with large data sets. Optional internal 60 GB SSD stores more waveforms than ever. The faster internal communication rates enable higher memory and faster update rates so you never miss a signal. Switch seamlessly between tapping, pinching and dragging the touchscreen or using the precise, tactile hardware controls so you can personalize the interaction that’s best for you.

Measurements

Save time by performing on-board measurements.Twenty-nine common waveform parameter measurements are included. Automated measurement of up to 30 simultaneous measurements is available to provide more insight directly inside the instrument.

Dual Zoom

An independent zoom processor rapidly zooms into data even at the maximum of 500 Megapoints. Dual zoom makes it easy to see events separated in time, choose specific input channels to display, and even auto scroll forwards or backwards in time. Zoom Search finds edges, patterns, pulsewidths, or timeout conditions for easier location of interesting data.

FFT Spectral Analysis

Perform up to 2 simultaneous FFT functions, using the current waveform or a running average.

Triggering

A new completely digital triggering system enables lower timing jitter and improved vertical level accuracy for precise response. Trigger modes available include:

• Edge (Rise/Fall/Both)
• Edge OR
• Pattern
• Pulse Width
• Rise/Fall Time
• Runt
• Timeout
• Window (upper and lower limits)
• Window OR
• Interval
• Serial (supporting installed serial bus options)
• TV (NTSC/PAL/SDTV/HDTV/user-defined)
• A Delay B
• A to B(n)

History

Determining cause and effect relationships is a daily task for design and validation phases of mechatronics projects. To provide the necessary extensive data sets, Yokogawa oscilloscopes take advantage of the large internal storage to retain data from previous capture events. Because the actual waveform data is stored, these events are available for browsing, visualization, measurement and searching using the History feature. Up to 100,000 previous captures are available depending on the record size and sampling rate.

Displaying the History List shows all available captures with timestamps. Click on any entry to display the data on the screen for interaction.

Search box

When visualizing all captures in history memory, it’s easy to see an outlier waveform. Using the search box and the touchscreen, it’s easy to draw search conditions directly on the waveform and isolate the occurrence.

The search box (white box) is used to isolate signals falling within its boundaries, making it easier to deal with thousands of data sets simultaneously. Here, two glitches are highlighted for Search.

Now the List view shows only the two waveforms matching the Search results, allowing the user to locate them in time or perform further measurements.

Statistics

Single measurements are very informative, but many projects require statistical measurements across a large data set. The DLM3000 can also perform measurements across the entire history memory, providing statistical analysis of maximum, minimum, mean, and standard deviation. For inspection of unusual measurements, the List function displays all values, indicating maxima and minima with arrow symbols, and tapping or selecting any measurement opens that historical data set for further observation.

Executing History Statistics reveals the maximum, minimum, mean and standard deviation of all calculated measurements. Count displays the number of waveforms evaluated.

Switching Loss

The Power Analysis option enables automatic calculations for Safe Operating Area (SOA), I2t and Switching Loss. The switching loss feature automatically detects switching cycles and relevant regions of switch mode power supply (SMPS) signals to calculate several parameters.

Automotive and Embedded Serial Bus Features

Communication between electronics control units (ECU's), sensors and actuators is especially important to ensure proper vehicle performance. Rapidly troubleshoot and validate popular automotive serial buses with CAN, CAN FD, LIN, SENT, CXPI and PSI5 Airbag options. Simultaneously plot physical layer and decoded data, search for specific data values or use data items as a trigger condition. Yokogawa’s proprietary auto setup function analyzes the input signal and complicated trigger / decode settings such as bit rate and threshold level are done automatically. This feature not only saves time but also is a very powerful feature that allows you to start parsing quickly even when bit rates and other signal conditions are unknown.

List view displays the timestamp and the data of each packet within the capture, and clicking on any packet immediately zooms into that packet for inspection. This is especially important when combined with Yokogawa's long Time/Division capabilities, when numerous frames are visible on a single screen.

SPI, UART and I2C options are also available for general purpose and consumer device communication applications.

Up to four serial buses can be configured and inspected simultaneously, for systems integration and complex control schemes.

Get Answers Faster with a New CPU Platform

The totally new CPU platform of the DLM3000 is equipped with Gigabit Ethernet and USB 3.0 (file transfer) as standard communication interfaces, handling data faster than ever. For example, DLM3000 is 10 times faster at saving to internal storage and about 10 times faster when transferring to a PC (when SSD internal storage and USB 3.0 file transfer are used).

Get answers faster, even with large data sets.

701988 Logic Probe 100 MHz / 8-bit

701988 (PBL100) Logic Probe

701989 Logic Probe 250 MHz / 8-bit

100 kΩ input resistance, toggle frequency of 250 MHz

701937 Passive probe 600V / 500 MHz

500 MHz, 10:1, 600 V (DC + ACpeak) CAT II, 1.3 m Supplied standard with DLM3000, DLM5000 series

701949 Miniature Passive Probe 400V / 500 MHz

500 MHz, 10:1, 400 Vrms, 1.3 m
For DLM3000, DLM5000 series

702907 Passive Probe 1000V / 200 MHz

200 MHz, 10:1, ±1000V (DC + ACpeak) CAT II, 2.5 m
Operating environment: −40 to +85°C (no condensation)
For DLM3000, DLM5000 series.

700939 Active FET Probe 10V / 900 MHz

• 700939 Active FET Probe
• 900 MHz Active FET Probe Circuit
• 10:1, ±10 V (DC + ACpeak) FET Input Active Probe
• 1.5 m

 

701944 High Voltage Passive Probe 1000Vrms / 400 MHz

• 701944 High Voltage Passive Probe 1000Vrms / 400 MHz
• For DL1700, DLM2000-6000, DL6000, DL9000, SB5000 series

701945 High Voltage Passive Probe 1000Vrms / 250 MHz

• 3m High Voltage Probe (oscilloscope)
• DC to 250 MHz bandwidth 
• 100:1 attenuation 
• Max Input 1000 Vrms CAT II 4000 V transient over-voltage CAT I

700925 Differential Probe 500V / 15 MHz

15 MHz, 100:1/10:1, Max. Differential Voltage: ±500 V (DC + ACpeak) or 350 Vrms at 100:1 attenuation, Probe Power: Internal battery or probe power supply Work with Oscilloscopes, ScopeCorders

701977 Differential Probe 7000 V / 50 MHz

• 701977 Differential Probe for Oscilloscope 7000 V / 50 MHz
• 50 MHz, 1000:1 / 100:1, Max.
• Differential Voltage: 5000 Vrms and 7000 Vpeak or less

701978 Differential Probe 1500 V / 150 MHz

• 701978 Differential Probe for Oscilloscope 
• 1500 V / 150 MHz
• 500:1 / 50:1
• Max. Differential Voltage：±1500 V (DC + ACpeak)

701924 Differential Probe 25V / 1 GHz

• 701924 Differential Probe
• 1 GHz, 50:1, Max. Differential Voltage: ±25 V (DC + ACpeak), Probe Power: dedicated probe interface

701925 PBDH0500 Differential Probe 25 V / 500 MHz

500 MHz, 50：1, Max. Differential Voltage：±25 V（DC+ACpeak）
Probe Power：Dedicated probe interface

701927 Differential Probe 1400V / 150 MHz

• 701927 Isolated Differential Probe
• 150 MHz 
• Max. Differential Voltage: ±1400 V (DC + ACpeak) at 500:1
• Probe Power: dedicated probe interface For DLM, DL, and SB5000 series

701917 Current Probe 50 MHz / 5 ARMS

• 701917 oscilloscope current probe
• Frequency bandwidth: DC to 50 MHz
• Maximum continuous input range: 5 Arms
• Functions with Digital Oscilloscopes, ScopeCorders, other waveform measuring instruments

701918 Current Probe 120 MHz / 5 ARMS

• Yokogawa 701918 Current Probe
• Frequency bandwidth: DC to 120 MHz
• Maximum continuous input range: 5 Arms
• Functions with Digital Oscilloscopes, ScopeCorders, other waveform measuring instruments

701929 Current Probe 50 MHz / 30 ARMS

• 701929 Current Probe 50 MHz / 30 ARMS
• Front-end powered
• Auto-recognized
• DLM2000-4000, DL/DLM6000, DL/DLM9000, SB5000

701928 Current Probe 100 MHz / 30 ARMS

• 701928 scope current probe
• Front-end powered
• Recognized automatically
• Adjust zero position from operation of DLM2000, DLM3000, DLM4000, DL6000/DLM6000, DL9000/DLM9000. SB5000 

701930 Current Probe 10 MHz / 150 ARMS

• 701930 Current Probe 10 MHz / 150 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

701931 Current Probe 2 MHz / 500 ARMS

• 701931 Current Probe 2 MHz / 500 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

702915 Current Probe 50 MHz/ 0.5 ARMS, 5 ARMS, 30 ARMS

• 702915 Current Probe
• Freq bandwidth: DC to 50 MHz
• Maxi continuous input range: 0.5 Arms/ 5 Arms/ 30 Arms
• Digital Oscilloscopes, ScopeCorders, other waveform measuring instruments

702916 Current Probe 120 MHz/ 0.5 ARMS, 5 ARMS, 30 ARMS

Frequency bandwidth: DC to 120 MHz
Maximum continuous input range: 0.5 Arms/5 Arms/30 Arms
Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments

701934 External Probe Power Supply

• 701934 External Probe Power Supply
• Power supply for current probes, FET probes, and differential probes
• Supplies power for up to four probes, including large current probes

B9852MJ Power Cable for Differential Probes

• B9852MJ power probe extension cable
• Supplies power to 700924, 700925, and 701921 differential probes from the DL probe power connectors
• Required on DL unit
• Only works with newer probes

701936 Deskew correction signal source

• 701936 Deskew Correction Signal Source
• Improve switching-loss measurements by deskewing
• Accommodates both clamp-on current probes and through-type ‘CT' Current Transformers

B9852ES Logic Probe IC Pin Clips

• B9852ES Logic Probe IC Pin Clips
• Attach to tips of logic probe (701988 or 701989) or mini-clips (B9852CR)
• Clip contiguous 0.5-mm pitch terminals
• 10 clips included

701909 Logic probe accessory kit

Logic probe accessory kit for use with 701989.

700971 Mini clip converter

A clip set designed for 701937, 701938, 701939, 701943 (PB500) and 700939

700972 BNC adapter

• 701937,701938, 701939, 701943 (PB500) and 700939

701901 BNC to Safety Banana 1.8m Cable, 1:1

• 701901 BNC to Safety Banana 1.8m Cable, 1:1
• 1000 Vrms-CAT II, 1.8 m long
• Safety BNC(male) to safety banana(female)
• 701959, 701954, 758921, 758922, 758929

701906 Long Test Clip

Set contains one black and one red clip
1000 Vrms-CAT II
2 pieces (red and black) in 1 set 
Connected to the 758933, 758917, or 701901
Length: 0.3m
Applicable for DL750/DL750P, SL1000, SL1400

701948 Extension Clip Accessories

Connected to the 700929, 701947
Maximum input voltage: 1,000V (DC + ACpeak)
Length: 0.26m/0.3m/0.4m
Applicable for DL750/DL750P, SL1000, SL1400

701954 Large Alligator Clip (dolphin type)

Set contains one black and one red clip.
1000 Vrms-CAT II.

758921 Fork terminal adapter

• 758921 Fork Terminal Adapters
• For fitting a 4mm banana plug to a fork terminal
• One black and one red clip
• 1000 Vrms-CAT II

758922 Small Alligator-Clip Adapter 300V

Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.

758929 Large Alligator Clip Adapter 1000V

• Yokogawa 758929 Alligator Clip Adapter 
• Rated at 1000V
• Attaches to 758917 test leads
• Sold in pairs black/red

758917 DMM Measurement Lead Set

• Set of 0.8m long red and black multimeter test leads
• Used in combination with a pair of optional 758922 or 758929 alligator-clip adapters
• 1000 Vrms, 32 Arms CAT II

761953 Safety Terminal Adapter Set

Two adapters to a set for 5 A current
(screw-fastened type using B9317WD)

B8200GD Screw for B8200JQ

Screws for B8200JQ, D-SUB connector

B9852HF Basic accessories set for the 701941 probe

The B9852HF contains the following eleven(11) kinds of accessories: Insulation cap, IC cap, BNC adapter, Rigid tip, Spring tip (Ø: 0.80 mm), Spring tip (Ø: 0.38 mm), Ground spring, Adjustment tool, Pincher tip, Standard ground lead, Color coding rings. PBL5000.

366924 BNC to BNC 1m Cable

• 366924 BNC to BNC cable for oscilloscope 
• 1m BNC wire
• Simultaneous measurement with 2 units
• Input external trigger signal

366923 BNC to T Adapter

T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.

366925 BNC to BNC 2m Cable

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

366926 BNC to Alligator 1m Cable, 1:1

• 1 m long BNC to alligator clip cable
• Only for circuits with voltage levels no greater than 42 V
• Applicable for DL750/DL750P, SL1000 & SL1400

366945 Printed circuit board adapter

For 701937, 701938, 701939, 701943 (PB500) and 700939.
Quantity of 1 unit: 10

366961 Banana to Alligator 1.2m Cable, 1:1

A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.

366946 Solder-in adapter

For 701937,701938, 701939, 701943 (PB500) and 700939 Standard accessories include: Adapter, red wire (3), black wire (3)

366921 BNC to Banana-Jack (Female) Adapter 42V

BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V.

758924 BNC to Banana Conversion Adapter

For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.

366922 BNC to Banana (Male) Adapter

Banana-plug (male)-BNC adapter. Use for circuits having voltage levels no greater than 42 V.

366973 Go/No-Go Cable

This cable is used to connect an external device, however, do not use this cable for purposes other than DL750/1600/1700/1700E/7400 GO/NO-GO judgement.

B9988AE Printer paper

Quality paper for the DLM2000 /DLM4000 /DL850 /DL6000 /DL9000 and DL750

701919 Probe Stand

• 701919 oscilloscope probe stand
• Flexible arm, heavy base to hold and stabilize 8-13mm probes
• Can simplify circuit board testing

701964 Soft carrying case for DLM2000

Three pockets are provided for storing accessories and the user’s manual.

751512 Banana (Male) to Binding Post Adapter

Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V.