- Leak Detector
- Vacuum Products
- Claw Pump
- Diaphragm Pumps
- Diffusion Pumps
- Dry Rotary Vane Pumps
- Dry Screw Pump
- Dry Scroll Pumps
- Ion Pumps
- Laboratory Vacuum Pumps
- Liquid Ring Vacuum Pump & Compressor
- Piston Vacuum Pump
- Roots Pumping Systems RPS Series
- Rotary Vane Pumps
- Spare Parts & Accessories
- Turbo Pumping Systems
- Turbo Pumps
- Vacuum Components
- Vacuum Measurement
- Vacuum System
- Furnace
- Digital Oscilloscopes
- Yokogawa
- Rigol
- Rigol DS70000 Series Digital Oscilloscope
- Rigol Digital Oscilloscope MSO8000 Series
- Rigol Digital Oscilloscope MSO/DS7000 Series
- Rigol Digital Oscilloscope DS6000 Series
- Rigol Digital Oscilloscope MSO5000 Series
- Rigol Digital Oscilloscope MSO/DS4000 Series
- Rigol Digital Oscilloscope MSO/DS2000 Series
- Rigol Digital Oscilloscope DS1000 Series
- GW Instek
- Saluki
- Siglent
- Data Acquisition
- DC Electronic Load
- DC Power Supply
- Digital Multimeters
- LCR Meter
- Signal Generator
- Network Analyzer
- Spectrum Analyzers
- Waveform Generators
- Power Analyzer and Power Meter
- Comprehensive Tester
- Electrical Tools
- Thermal Imager & Thermometer
- Test & Measurement
- Transformer
- Professional Cleaning Equipment
- Professional Power Tools
- Angle grinders & metalworking
- Benchtop Tools & Benches
- Carrying Case
- Cordless Tools
- 12 Volt System
- 18 Volt System
- 18V Tools
- 36 Volt System
- Charger
- Cordless Angle Grinder
- Cordless Drywall Screwdrivers
- Cordless Dust Extractors
- Cordless hand-held circular saws
- Cordless impact drills
- Cordless Impact Drivers/Wrenchers
- Cordless Jigsaw
- Cordless Multi-Cutter
- Cordless Orbital Sander
- Cordless Palm Router
- Cordless Planer
- Cordless Reciprocating Saw
- Cordless Rotary Hammer
- Cordless Rotary Tool
- Cordless Straight Grinder
- Cordless Worklights
- Measuring Technology
- Diamond Technology
- Drills & impact drills & screwdrivers
- Dust Extraction Systems
- Heat Guns & Glue Guns
- High-Pressure Washer
- Measuring Technology
- Rotary Hammers & Demolition hammers
- Routers
- Sanders & Planers
- Saws
- Stirrers
- Rental
- MRO
- Jonnesway
- RS Pro
- Beacons
- Cabinet Coolers
- Cable Clips & Clamps
- Cage Nuts
- Camlocks
- Chisels
- Coaxial Cable
- Code Locks
- Compression Springs
- Counters
- Cutters
- DIN Rail Power Supplies
- Door Bolts
- Door Catches
- Door Closers
- Door Latches
- Door Stops
- Drawer Handles & Cabinet Handles
- Electronic Sounders
- Energy Meters
- Fixed Installation DC-AC Power Inverters
- Hammers
- Hasp & Staples
- HDMI Cables
- Heater Pads
- Heating Elements
- Hex Keys
- Impact Sockets
- Industrial Hubs & Switches
- Jack Cable Assemblies
- Multicore Microphone & Instrument Cable
- Number & Letter Punch Sets
- Nut Drivers
- Pliers
- Punches
- Rack Cable Management
- Rack Panels
- Rackmount Cases
- Screw Extractors
- Screwdriver Bit Sets
- Screwdriver Bits
- Screwdriver Sets
- Screwdrivers
- Scribers
- Sensor Accessories
- Server Cabinet Accessories
- Server Rack Shelves
- Single Core Microphone Cable
- Socket Accessories
- Socket Sets
- Socket Wrenches
- Spanner Sets
- Spring Plungers & Indexing Plungers
- Tap & Die Wrenches
- Temperature Control Accessories
- Temperature Controllers
- Temperature Probes
- Temperature Transmitters
- Thermocouple & Extension Wire
- Thermocouples
- Thermostatic Switches
- Time Switches
- Timer Relays
- Torque Screwdrivers
- Torque Wrenches
- Torx Keys
- USB Cables
- USB Extension Cables
- VGA Cables
- Others
- TEMO
- Skinny Tools
- Algodue
- Consumable
- Vacuum Measurements
Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
+60129541088
Selangor Branch
Jalan Putra Bistari 2/5J, 47610 Subang Jaya, Selangor, Malaysia
Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.
Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.
BK Precision Digital Bench Power Supply, 30V, 3A, 3-Output, 195W, BK9129B
| Previous | 55 / 87 | Next |
BK Precision Digital Bench Power Supply, 30V, 3A, 3-Output, 195W, BK9129B, 121-7585
B&K Precision model 9129B is an economical triple output linear programmable DC power supply. It features isolated outputs that can be adjusted independently or combined in series or parallel to output higher voltage or current. The 9129B can operate in tracking mode with user-configurable ratios between channels. The front panel keys and rotary knob, with convenient cursors, let users quickly set voltage and current values. Up to 27 different instrument settings can be saved and recalled. The power-on state of the outputs can also be configured.
The USB to TTL interface supporting SCPI commands can be used to remotely control the power supply via a PC. Alternatively, users can use the provided PC software application to control the 9129B, execute test sequences or log measurements. This software also integrates with Data Dashboard for LabVIEW
apps (enabling iOS, Android or Windows 8 compatible tablets or smartphones to remotely monitor select measurement indicators).
Three independent and electrically isolated outputs
Displays voltage and current settings for all three channels simultaneously
Low noise, linear regulation
Series and parallel modes combine channels to increase the output voltage or current
Tracking mode allows users to set up channels to maintain a programmed ratio
Fully programmable channels with Output On/Off control
Store and recall up to 27 instrument settings
Communicate via USB interface supporting
SCPI commands using the included USB to TTL serial adapter
Overvoltage (OVP) and overtemperature (OTP) protection including keylock function
Compact 19 in half-rack form factor allows for side-by-side rack mounting of two units
Education
Service
Electronic design
B&K Precision
Product Details
B&K Precision Model 9129B Triple Output Programmable DC Power Supply
B&K Precision Model 9129B Triple Output Programmable DC Power Supply
B&K Precision model 9129B is an economical triple output linear programmable DC power supply. It features isolated outputs that can be adjusted independently or combined in series or parallel to output higher voltage or current. The 9129B can operate in tracking mode with user-configurable ratios between channels. The front panel keys and rotary knob, with convenient cursors, let users quickly set voltage and current values. Up to 27 different instrument settings can be saved and recalled. The power-on state of the outputs can also be configured.
The USB to TTL interface supporting SCPI commands can be used to remotely control the power supply via a PC. Alternatively, users can use the provided PC software application to control the 9129B, execute test sequences or log measurements. This software also integrates with Data Dashboard for LabVIEW
apps (enabling iOS, Android or Windows 8 compatible tablets or smartphones to remotely monitor select measurement indicators).
Features and Benefits
Three independent and electrically isolated outputs
Displays voltage and current settings for all three channels simultaneously
Low noise, linear regulation
Series and parallel modes combine channels to increase the output voltage or current
Tracking mode allows users to set up channels to maintain a programmed ratio
Fully programmable channels with Output On/Off control
Store and recall up to 27 instrument settings
Communicate via USB interface supporting
SCPI commands using the included USB to TTL serial adapter
Overvoltage (OVP) and overtemperature (OTP) protection including keylock function
Compact 19 in half-rack form factor allows for side-by-side rack mounting of two units
Areas of Application
Education
Service
Electronic design
Supplied with
Power cord, IT-E132B (USB to TTL serial adapter plus USB cable), test report, certificate of calibration
Specifications
| Attribute | Value |
|---|---|
| Model Number | BK9129B |
| Number of Outputs | 3 |
| Supply Voltage | 110 V ac, 220V ac |
| Output Voltage | 30V |
| Output Current | 3A |
| Power Rating | 195W |
| Number of Displays | 6 |
| Type | Digital |
| Bench Power Supply Type | Programmable DC Power Supply |
| Digital/Analogue | Digital |
| Input Connector | IEC 320 |
| Output Connector | Binding Post Terminal |
| Maximum Temperature | +40°C |
| Minimum Temperature | 0°C |