Description
Economy Series: 0.9 CF Vacuum Drying Oven with LED Lights | Max temp 150C
AT09e series digital desktop 0.9 CF Vacuum Drying Oven feature an easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These vacuum ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.
These vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities.
Attention: Before initial use, run oven at 200°C/400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process.
IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Manufacturer is not responsible for any loss of material inside of the oven.
Features

• Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.
  • Digivac recommendation: by adding a digital vacuum gauge get more accurate readings and ability to view readings in vacuum units you prefer.
    • The Digivac Bullseye Precision Gauge offers readings in (Torr, mbar, bar, kPa, inches of Hg, mm Hg, millitorr, microns, inches of water, PSI, Pa). Choose this Bullseye with upgraded KF25 sensor to pair with this vacuum oven.
• 3rd gen LCD low proportional gain temperature controllers keep your oven temperature accurate.
• Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.
• For clean and quiet vacuum we recommend the IDP-3 vacuum pump
• Dual layer observation window with 1/2″ tempered safety glass.
• 3″ thermal insulation prevents heat loss and minimizes the enclosure’s outer surface temperature.
• Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
• Built-in alarm will alert you when oven has been shut down by safety circuitry due to out of range temperature.
• All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with two year warranty and lifetime US-based parts and service support.

 Manufactured in accordance with

• ISO 9001:2000
• ISO 12100-1:2003, ISO 12100-2:2003
• EN1050:1996, EN294:1992, EN60204-1:2006
• CE

Standard package

Part description	Quantity	Part image
Ai 0.9 cu ft vacuum oven	1 pc
Aluminum shelf	4 pcs
KF25 quick clamp and centering ring	1 set
Quick disconnect fitting (pre-installed at vent port)	1 pc
Led Light Cable	1 pc
Users manual	1 pc

 
Technical Specifications

Electrical requirements	110V or 220V ±10%, 60Hz, 1-PH, 1,500 watts
Chamber	Size: 12 x 12 x 11″ Material: Stainless steel Capacity: 0.9 cubic foot
Heater	3-sided heating (left 400W, right 400W, bottom 700W)
Temperature control	Controller: 3rd gen low proportional gain, microcomputer PID controlled Range: ambient to 150°C Display units: Fahrenheit or Celsius Uniformity: +/- 5% of setpoint Dwelling timer range: 1 to 9999 minutes Warm-up time to 480°F: 80 minutes (Approx.)
Vacuum	Ultimate vacuum level: better than 500 microns/millitorrs (may vary based on your altitude) Mechanical gauge range: 0 to 30 inch mercury Vacuum port: KF25 flange x 1 Vent port: 1/4″ ball valve Vacuum pump: Sold separately
Weight	Unit: 85 Lbs, shipping: 170 Lbs
Dimensions (WxDxH)	Unit: 23.4 x 17.25 x 19″  With handle and vacuum port: 23.4 x 20 x 19″ Shipping: 29 x 29 x 29″
Shelves	Included with oven purchase: 4 aluminum slide-in shelves Capacity: 8 shelves max. Style: pan-shape Size: 11.5 x 11.25″ Maximum area: 129.4 x 8 = 7 sq ft or 1035 inch2 Distance between shelves: one inch
Door gasket material	Silicone or Viton
Observation window	1/2″ tempered safety glass
Safety	Built-in circuit breaker Overheat shutoff protection
In-door lights	White LED
Warranty	1 year
Compliance	CE