- Leak Detector
- Vacuum Products
- Claw Pump
- Diaphragm Pumps
- Diffusion Pumps
- Dry Rotary Vane Pumps
- Dry Screw Pump
- Dry Scroll Pumps
- Ion Pumps
- Laboratory Vacuum Pumps
- Liquid Ring Vacuum Pump & Compressor
- Piston Vacuum Pump
- Roots Pumping Systems RPS Series
- Rotary Vane Pumps
- Spare Parts & Accessories
- Turbo Pumping Systems
- Turbo Pumps
- Vacuum Components
- Vacuum Measurement
- Vacuum System
- Furnace
- Digital Oscilloscopes
- Yokogawa
- Rigol
- Rigol DS70000 Series Digital Oscilloscope
- Rigol Digital Oscilloscope MSO8000 Series
- Rigol Digital Oscilloscope MSO/DS7000 Series
- Rigol Digital Oscilloscope DS6000 Series
- Rigol Digital Oscilloscope MSO5000 Series
- Rigol Digital Oscilloscope MSO/DS4000 Series
- Rigol Digital Oscilloscope MSO/DS2000 Series
- Rigol Digital Oscilloscope DS1000 Series
- GW Instek
- Saluki
- Siglent
- Data Acquisition
- DC Electronic Load
- DC Power Supply
- Digital Multimeters
- LCR Meter
- Signal Generator
- Network Analyzer
- Spectrum Analyzers
- Waveform Generators
- Test & Measurement
- Flow Meter
- Manometer
- Optical Test
- Power Electronics Training Systems
- Safety Tester
- Other Meters
- Accessories for Test & Measurement
- Cable & Antenna Analyzer
- Cable & Pipe Locators
- Clamp Meter
- Comprehensive Tester
- GPS / GNSS Simulators
- Insulation Tester
- Non-Contact Voltage Tester
- Power Analyzer & Power Meter
- Power Supply
- Thermal Imager & Thermometer
- Transformer
- Professional Cleaning Equipment
- Professional Power Tools
- Angle grinders & metalworking
- Benchtop Tools & Benches
- Carrying Case
- Cordless Tools
- 12 Volt System
- 18 Volt System
- 18V Tools
- 36 Volt System
- Charger
- Cordless Angle Grinder
- Cordless Drywall Screwdrivers
- Cordless Dust Extractors
- Cordless hand-held circular saws
- Cordless impact drills
- Cordless Impact Drivers/Wrenchers
- Cordless Jigsaw
- Cordless Multi-Cutter
- Cordless Orbital Sander
- Cordless Palm Router
- Cordless Planer
- Cordless Reciprocating Saw
- Cordless Rotary Hammer
- Cordless Rotary Tool
- Cordless Straight Grinder
- Cordless Worklights
- Measuring Technology
- Diamond Technology
- Drills & impact drills & screwdrivers
- Dust Extraction Systems
- Heat Guns & Glue Guns
- High-Pressure Washer
- Measuring Technology
- Rotary Hammers & Demolition hammers
- Routers
- Sanders & Planers
- Saws
- Stirrers
- Rental
- MRO
- Jonnesway
- RS Pro
- Beacons
- Cabinet Coolers
- Cable Clips & Clamps
- Cage Nuts
- Camlocks
- Chisels
- Coaxial Cable
- Code Locks
- Compression Springs
- Counters
- Cutters
- DIN Rail Power Supplies
- Door Bolts
- Door Catches
- Door Closers
- Door Latches
- Door Stops
- Drawer Handles & Cabinet Handles
- Electronic Sounders
- Energy Meters
- Fixed Installation DC-AC Power Inverters
- Hammers
- Hasp & Staples
- HDMI Cables
- Heater Pads
- Heating Elements
- Hex Keys
- Impact Sockets
- Industrial Hubs & Switches
- Jack Cable Assemblies
- Multicore Microphone & Instrument Cable
- Number & Letter Punch Sets
- Nut Drivers
- Pliers
- Punches
- Rack Cable Management
- Rack Panels
- Rackmount Cases
- Screw Extractors
- Screwdriver Bit Sets
- Screwdriver Bits
- Screwdriver Sets
- Screwdrivers
- Scribers
- Sensor Accessories
- Server Cabinet Accessories
- Server Rack Shelves
- Single Core Microphone Cable
- Socket Accessories
- Socket Sets
- Socket Wrenches
- Spanner Sets
- Spring Plungers & Indexing Plungers
- Tap & Die Wrenches
- Temperature Control Accessories
- Temperature Controllers
- Temperature Probes
- Temperature Transmitters
- Thermocouple & Extension Wire
- Thermocouples
- Thermostatic Switches
- Time Switches
- Timer Relays
- Torque Screwdrivers
- Torque Wrenches
- Torx Keys
- USB Cables
- USB Extension Cables
- VGA Cables
- Others
- TEMO
- Skinny Tools
- Algodue
- Greenwipes
Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
+60129541088
Selangor Branch
Jalan Putra Bistari 2/5J, 47610 Subang Jaya, Selangor, Malaysia
Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.
Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.
TH2840 Series Super Fast LCR Meter
Previous | 8 / 15 | Next |
Frequency 20Hz-2MHz.
Basic Accuracy: 0.05%
AC Signal: 20V/100mA
DC Bias: 0+/-40V, 0+/-100mA
AC Current Source: +/-2A
Features
¡ö Test frequency: 20Hz-2MHz
¡ö High stability and consistency: 14 range configurations
¡ö High power: signal level: 20VAC/100mAAC
Built-in DC bias: ±40VDC/100mADC
Built-in current source: ±2A
¡ö DCR level: 20VDC/100mADC
¡ö High speed: dual CPU architecture, measurement speed up to 1000 times/s
¡ö High resolution: 10.1 inches, resolution 1280*800, capacitive touch screen
¡ö Three test methods: point test, list scan, and graph scan
¡ö Four-parameter measurement
¡ö 201 point multi-parameter list scanning function
¡ö Graphic scanning function, 4 trajectories can be selected arbitrarily, support 1/2/4 split screen
¡ö Sorting function: 10 levels of sorting in LCR mode
¡ö High compatibility: support SCPI/MODBUS instruction set, compatible with KEYSIGHT E4980A, E4980AL, HP4284A
Specifications
Accessary
Basic Accuracy: 0.05%
AC Signal: 20V/100mA
DC Bias: 0+/-40V, 0+/-100mA
AC Current Source: +/-2A
Features
¡ö Test frequency: 20Hz-2MHz
¡ö High stability and consistency: 14 range configurations
¡ö High power: signal level: 20VAC/100mAAC
Built-in DC bias: ±40VDC/100mADC
Built-in current source: ±2A
¡ö DCR level: 20VDC/100mADC
¡ö High speed: dual CPU architecture, measurement speed up to 1000 times/s
¡ö High resolution: 10.1 inches, resolution 1280*800, capacitive touch screen
¡ö Three test methods: point test, list scan, and graph scan
¡ö Four-parameter measurement
¡ö 201 point multi-parameter list scanning function
¡ö Graphic scanning function, 4 trajectories can be selected arbitrarily, support 1/2/4 split screen
¡ö Sorting function: 10 levels of sorting in LCR mode
¡ö High compatibility: support SCPI/MODBUS instruction set, compatible with KEYSIGHT E4980A, E4980AL, HP4284A
Specifications
Model | TH2840A | TH2840B | ||
Display | Display | 10.1'' Touch Screen | ||
Ratio | 16:09 | |||
Resolution | 1280×RGB×800 | |||
Parameter | Test Mode | Four Parameter Selectable | ||
AC | Cp/Cs, Lp/Ls, Rp/Rs, |Z|, |Y|, R, X, G, B, θ, D, Q, VAC, IAC | |||
DC | RDC, VDC, IDC | |||
Frequency | Range | 20Hz-500kHz | 20Hz-2MHz | |
Accuracy | 0.01% | |||
Resolution | 0.1mHz (20.0000Hz-99.9999Hz) | |||
1mHz (100.000Hz-999.999Hz) | ||||
10mHz (1.00000kHz-9.99999kHz) | ||||
100mHz (10.0000kHz-99.9999kHz ) | ||||
1Hz (100.000kHz-999.999kHz) | ||||
10Hz (1.00000MHz-2.00000MHz) | ||||
AC test signal mode |
Rated value (ALC OFF) |
Set the voltage as the Hcur voltage when the test terminal is open | ||
Set the current to be the current flowing from Hcur when the test terminal is short-circuited |
||||
Constant value (ALC ON) |
Keep the voltage on the DUT the same as the set value | |||
Keep the current on the DUT the same as the set value | ||||
Test Level | AC Voltage | 5mVrms-20Vrms | F≤1MHz 5mVrms-20Vrms | |
F£¾1MHz 5mVrms-15Vrms | ||||
Accuracy | ±£¨10%×Set Value+2mV) (AC less than 2Vrms) | |||
±£¨10%×Set Value+5mV£©£¨AC£¾2Vrms£© | ||||
Resolution | 1mVrms£¨5mVrms-0.2Vrms£© | |||
1mVrms£¨0.2Vrms-0.5Vrms£© | ||||
1mVrms(0.5Vrms-1Vrms) | ||||
10mVrms(1Vrms-2Vrms) | ||||
10mVrms(2Vrms-5Vrms) | ||||
10mVrms(5Vrms-10Vrms) | ||||
10mVrms(10Vrms-20Vrms) | ||||
AC Current | 50μArms-100mArms | |||
Resolution (100Ω Internal Resistance) | 10μArms (50μArms-2mArms) | |||
10μArms (2mArms-5mArms) | ||||
10μArms (5mArms-10mArms) | ||||
100μArms (10mArms-20mArms) | ||||
100μArms (20mArms-50mArms) | ||||
100μArms (50mArms-100mArms) | ||||
RDC Test | Voltage | 100mV-20V | ||
Resolution | 1mV(0V-1V) | |||
10mV(1V-20V) | ||||
Current | 0mA-100mA | |||
Resolution | 10μA(0mA-10mA) | |||
100μA(10mA-100mA) | ||||
DC Bias | Voltage | 0V-±40V | ||
Accuracy | AC=<2V 1%× Set Value+5mV | |||
AC>2V 2%×Set Value+8mV | ||||
Resolution | 1mV(0V-1V) | |||
10mV(±1V- ±40V) | ||||
Current | 0mA-±100mA | |||
Resolution | 10μA(0mA-10mA) | |||
100μA(10mA-100mA) | ||||
Built-in current source |
Current | 0mA-2A | ||
Accuracy | I>5mA ±£¨2%×Set Value+2mA£© | |||
Resolution | 1mA | |||
Test terminal configuration | Four Terminal Pair | |||
Test cable length | 0m, 1m, 2m, 4m | |||
Output impedance | 30Ω, ±4%@1kHz | |||
100Ω, ±2%@1kHz | ||||
Computation |
The absolute deviation from the nominal value Δ, the percentage deviation from the nominal value Δ% |
|||
Equivalent way | Series, Parallel | |||
Calibration function | OPEN, SHORT, LOAD | |||
Measurement average | 1-255 | |||
Range selection | AUTO, HOLD | |||
Range configuration |
LCR | 100mΩ, 1Ω, 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ | ||
Rdc | 1Ω, 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ | |||
Measuring time (ms) | Fast+: 1ms | |||
Fast:3.3ms | ||||
Middle: 90ms | ||||
Slow: 220ms | ||||
Highest accuracy | 0.05% (refer to the instruction manual for details) | |||
Measurement display range | ||||
Cs, Cp | 0.00001pF-9.99999F | |||
Ls, Lp | 0.00001μH-99.9999kH | |||
D | 0.00001-9.99999 | |||
Q | 0.00001-99999.9 | |||
R, Rs, Rp, X, Z, RDC | 0.001mΩ-99.9999MΩ | |||
G, B, Y | 0.00001μs-99.9999S | |||
VDC | ±0V-±999.999V | |||
IDC | ±0A-±999.999A | |||
θr | -3.14159-3.14159 | |||
θd | -179.999°-179.999° | |||
Δ% | ±£¨0.000%-999.9%£© | |||
Multi-function parameter list scan |
Dots Number |
201 points, average times can be set for each point, and each point can be sorted separately |
||
Parameter | Test frequency, AC voltage, AC current, DC BIAS voltage, DC BIAS current (100mA), DC BIAS current (2A) | |||
Trigger mode | Sequence SEQ: After a trigger, measure at all sweep points, and /EOM/INDEX will output only once | |||
Step STEP: Perform a sweep point measurement each time it is triggered, and each point outputs /EOM/INDEX, but the list sweep comparator result is only output at the last /EOM | ||||
Other features | 1. Scan parameters and test parameters have multiple copy functions | |||
2. Delay can be set for each scan point | ||||
Comparators | Each sweep point can measure up to four test parameters, each parameter can set upper and lower limits, all test parameters are qualified, output PASS signal, otherwise output FAIL signal, no upper and lower limits are set, no judgment | |||
Graphic scan | Scan points | 51, 101, 201, 401, 801 Optional | ||
The results | The extreme value of each parameter and the sweep parameter value at the point where the cursor is located and the corresponding test parameter value | |||
Scan trajectory | 1-4 test parameters can be selected arbitrarily, the scanning curve can be divided into one screen, two screens, or four screens. | |||
Display range | Real-time automatic, locked | |||
Coordinate ruler | Logarithmic, linear | |||
Scan parameters | Frequency, AC voltage, AC current, DCV BIAS / DCI BIAS (100mA) / DCI BIAS (2A) | |||
Trigger mode |
single | Manually trigger once, and complete a scan from the start point to the end point, and the next trigger signal starts a new scan | ||
continuous | Infinite loop scanning from start to end | |||
Results save | Graphics, files | |||
Comparators | Bin | 10Bin, PASS, FAIL | ||
Bin deviation setting | Deviation value, percentage deviation value, off | |||
Bin mode | Tolerance, continuous | |||
Bin count | 0-99999 | |||
Discrimination |
Up to four parameter limit ranges can be set for each file. The corresponding file number is displayed within the setting range of the four test parameter results. If the maximum file number range is exceeded, FAIL is displayed. The test parameters without the upper and lower limits are automatically ignored. |
|||
PASS/FAIL indication | Meet Bin1-10, the PASS light on the front panel is on, otherwise the FAIL light is on | |||
Data cache | 201 measurement results can be read in batches | |||
Store call | Inside | About 100M non-volatile memory test setting file | ||
External USB | Test setting file, screenshot graph, record file | |||
Keyboard lock | The front panel keys can be locked, other functions to be expanded | |||
Interface | USB HOST | 2 USB HOST ports, can connect mouse and keyboard at the same time, only one U disk can be used at the same time | ||
USB DEVICE | Universal serial bus socket, small type B (4 contact positions); compatible with USB TMCUSB488 and USB2.0, the female connector is used to connect an external controller. | |||
LAN | 10/100M Ethernet adaptive | |||
HANDLER | Used for Bin signal output | |||
External DC BIAS control | Support TH1778A | |||
RS232C | Standard 9-pin, cross | |||
RS485 | Can accept modification or external RS232 to RS485 module | |||
Power-on warm-up time | 60 Minutes | |||
Input voltage | 100-120VAC/198-242VAC Option, 47-63Hz | |||
Power consumption | More than 130VA | |||
Size (WxHxD) mm3 | 430x177x265 | |||
Weight (kg) | 11kg |
Accessary
Standard | ||||||
Accessories name | Model | |||||
Fixture | TH26048 |
![]() |
||||
Short circuit | TH26010 |
![]() |
||||
Kelvin test lead with box four-terminal insulation and lock | TH26011BS |
![]() |